pytorch/docs/source/quantization.rst

.. _quantization-doc:

Quantization
============

Introduction to Quantization
----------------------------

Quantization refers to techniques for performing computations and storing
tensors at lower bitwidths than floating point precision. A quantized model
executes some or all of the operations on tensors with integers rather than
floating point values. This allows for a more compact model representation and
the use of high performance vectorized operations on many hardware platforms.
PyTorch supports INT8 quantization compared to typical FP32 models allowing for
a 4x reduction in the model size and a 4x reduction in memory bandwidth
requirements.  Hardware support for  INT8 computations is typically 2 to 4
times faster compared to FP32 compute. Quantization is primarily a technique to
speed up inference and only the forward pass is supported for quantized
operators.

PyTorch supports multiple approaches to quantizing a deep learning model. In
most cases the model is trained in FP32 and then the model is converted to
INT8. In addition, PyTorch also supports quantization aware training, which
models quantization errors in both the forward and backward passes using
fake-quantization modules. Note that the entire computation is carried out in
floating point. At the end of quantization aware training, PyTorch provides
conversion functions to convert the trained model into lower precision.

At lower level, PyTorch provides a way to represent quantized tensors and
perform operations with them. They can be used to directly construct models
that perform all or part of the computation in lower precision. Higher-level
APIs are provided that incorporate typical workflows of converting FP32 model
to lower precision with minimal accuracy loss.

Today, PyTorch supports the following backends for running quantized operators efficiently:

* x86 CPUs with AVX2 support or higher (without AVX2 some operations have
  inefficient implementations)
* ARM CPUs (typically found in mobile/embedded devices)

The corresponding implementation is chosen automatically based on the PyTorch build mode.

.. note::

  PyTorch 1.3 doesn't provide quantized operator implementations on CUDA yet -
  this is direction of future work.  Move the model to CPU in order to test the
  quantized functionality.

  Quantization-aware training (through :class:`~torch.quantization.FakeQuantize`)
  supports both CPU and CUDA.


.. note::

    When preparing a quantized model, it is necessary to ensure that qconfig
    and the engine used for quantized computations match the backend on which
    the model will be executed. Quantization currently supports two backends:
    fbgemm (for use on x86, `<https://github.com/pytorch/FBGEMM>`_) and qnnpack
    (for use on the ARM QNNPACK library `<https://github.com/pytorch/QNNPACK>`_).
    For example, if you are interested in quantizing a model to run on ARM, it
    is recommended to set the qconfig by calling:

    ``qconfig = torch.quantization.get_default_qconfig('qnnpack')``

    for post training quantization and

    ``qconfig = torch.quantization.get_default_qat_qconfig('qnnpack')``

    for quantization aware training.

    In addition, the torch.backends.quantized.engine parameter should be set to
    match the backend. For using qnnpack for inference, the backend is set to
    qnnpack as follows

    ``torch.backends.quantized.engine = 'qnnpack'``

Quantized Tensors
---------------------------------------

PyTorch supports both per tensor and per channel asymmetric linear
quantization. Per tensor means that all the values within the tensor are
scaled the same way. Per channel means that for each dimension, typically
the channel dimension of a tensor, the values
in the tensor are scaled and offset by a different value (effectively
the scale and offset become vectors). This allows for lesser error in converting tensors
to quantized values.

The mapping is performed by converting the floating point tensors using

.. image:: math-quantizer-equation.png
   :width: 40%

Note that, we ensure that zero in floating point is represented with no error
after quantization, thereby ensuring that operations like padding do not cause
additional quantization error.

In order to do quantization in PyTorch, we need to be able to represent
quantized data in Tensors. A Quantized Tensor allows for storing
quantized data (represented as int8/uint8/int32) along with quantization
parameters like scale and zero\_point. Quantized Tensors allow for many
useful operations making quantized arithmetic easy, in addition to
allowing for serialization of data in a quantized format.

Operation coverage
------------------

Quantized Tensors support a limited subset of data manipulation methods of the
regular full-precision tensor. (see list below)

For NN operators included in PyTorch, we restrict support to:

   1. 8 bit weights (data\_type = qint8)
   2. 8 bit activations (data\_type = quint8)

Note that operator implementations currently only
support per channel quantization for weights of the **conv** and **linear**
operators. Furthermore the minimum and the maximum of the input data is
mapped linearly to the minimum and the maximum of the quantized data
type such that zero is represented with no quantization error.

Additional data types and quantization schemes can be implemented through
the `custom operator mechanism <https://pytorch.org/tutorials/advanced/torch_script_custom_ops.html>`_.

Many operations for quantized tensors are available under the same API as full
float version in ``torch`` or ``torch.nn``. Quantized version of NN modules that
perform re-quantization are available in ``torch.nn.quantized``. Those
operations explicitly take output quantization parameters (scale and zero\_point) in
the operation signature.

In addition, we also support fused versions corresponding to common fusion
patterns that impact quantization at: `torch.nn.intrinsic.quantized`.

For quantization aware training, we support modules prepared for quantization
aware training at `torch.nn.qat` and `torch.nn.intrinsic.qat`

Current quantized operation list is sufficient to cover typical CNN and RNN
models:


Quantized ``torch.Tensor`` operations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Operations that are available from the ``torch`` namespace or as methods on
Tensor for quantized tensors:

* :func:`~torch.quantize_per_tensor` - Convert float tensor to quantized tensor
  with per-tensor scale and zero point
* :func:`~torch.quantize_per_channel` - Convert float tensor to quantized
  tensor with per-channel scale and zero point
* View-based operations like :meth:`~torch.Tensor.view`,
  :meth:`~torch.Tensor.as_strided`, :meth:`~torch.Tensor.expand`,
  :meth:`~torch.Tensor.flatten`, :meth:`~torch.Tensor.select`, python-style
  indexing, etc - work as on regular tensor (if quantization is not
  per-channel)
* Comparators
    * :meth:`~torch.Tensor.ne` — Not equal
    * :meth:`~torch.Tensor.eq` — Equal
    * :meth:`~torch.Tensor.ge` — Greater or equal
    * :meth:`~torch.Tensor.le` — Less or equal
    * :meth:`~torch.Tensor.gt` — Greater
    * :meth:`~torch.Tensor.lt` — Less
* :meth:`~torch.Tensor.copy_` — Copies src to self in-place
* :meth:`~torch.Tensor.clone` —  Returns a deep copy of the passed-in tensor
* :meth:`~torch.Tensor.dequantize` — Convert quantized tensor to float tensor
* :meth:`~torch.Tensor.equal` — Compares two tensors, returns true if
  quantization parameters and all integer elements are the same
* :meth:`~torch.Tensor.int_repr` — Prints the underlying integer representation
  of the quantized tensor
* :meth:`~torch.Tensor.max` — Returns the maximum value of the tensor (reduction only)
* :meth:`~torch.Tensor.mean` — Mean function. Supported variants: reduction, dim, out
* :meth:`~torch.Tensor.min` — Returns the minimum value of the tensor (reduction only)
* :meth:`~torch.Tensor.q_scale` — Returns the scale of the per-tensor quantized tensor
* :meth:`~torch.Tensor.q_zero_point` — Returns the zero_point of the per-tensor
  quantized zero point
* :meth:`~torch.Tensor.q_per_channel_scales` — Returns the scales of the
  per-channel quantized tensor
* :meth:`~torch.Tensor.q_per_channel_zero_points` — Returns the zero points of
  the per-channel quantized tensor
* :meth:`~torch.Tensor.q_per_channel_axis` — Returns the channel axis of the
  per-channel quantized tensor
* :meth:`~torch.Tensor.resize_` — In-place resize
* :meth:`~torch.Tensor.sort` — Sorts the tensor
* :meth:`~torch.Tensor.topk` — Returns k largest values of a tensor

``torch.nn.functional``
~~~~~~~~~~~~~~~~~~~~~~~

Basic activations are supported.

* :meth:`~torch.nn.functional.relu` — Rectified linear unit (copy)
* :meth:`~torch.nn.functional.relu_` — Rectified linear unit (inplace)
* :meth:`~torch.nn.functional.max_pool2d` - Maximum pooling 
* :meth:`~torch.nn.functional.adaptive_avg_pool2d` - Adaptive average pooling
* :meth:`~torch.nn.functional.avg_pool2d` - Average pooling
* :meth:`~torch.nn.functional.interpolate` - Interpolation
* :meth:`~torch.nn.functional.upsample` - Upsampling
* :meth:`~torch.nn.functional.upsample_bilinear` - Bilinear Upsampling 
* :meth:`~torch.nn.functional.upsample_nearest` - Upsampling Nearest

``torch.nn.intrinsic``
~~~~~~~~~~~~~~~~~~~~~~

Fused modules are provided for common patterns in CNNs. Combining several
operations together (like convolution and relu) allows for better quantization
accuracy

* ``torch.nn.intrinsic`` — float versions of the modules, can be swapped with
  quantized version 1 to 1:

  * :class:`~torch.nn.intrinsic.ConvBn2d` — Conv2d + BatchNorm
  * :class:`~torch.nn.intrinsic.ConvBnReLU2d` — Conv2d + BatchNorm + ReLU
  * :class:`~torch.nn.intrinsic.ConvReLU2d` — Conv2d + ReLU
  * :class:`~torch.nn.intrinsic.ConvReLU3d` — Conv3d + ReLU
  * :class:`~torch.nn.intrinsic.LinearReLU` — Linear + ReLU

* ``torch.nn.intrinsic.qat`` — versions of layers for quantization-aware training:
  * :class:`~torch.nn.intrinsic.qat.ConvBn2d` — Conv2d + BatchNorm
  * :class:`~torch.nn.intrinsic.qat.ConvBnReLU2d` — Conv2d + BatchNorm + ReLU
  * :class:`~torch.nn.intrinsic.qat.ConvReLU2d` — Conv2d + ReLU
  * :class:`~torch.nn.intrinsic.qat.LinearReLU` — Linear + ReLU

* ``torch.nn.intrinsic.quantized`` — quantized version of fused layers for
  inference (no BatchNorm variants as it's usually folded into convolution for
  inference):
  * :class:`~torch.nn.intrinsic.quantized.LinearReLU` — Linear + ReLU
  * :class:`~torch.nn.intrinsic.quantized.ConvReLU2d` — 2D Convolution + ReLU
  * :class:`~torch.nn.intrinsic.quantized.ConvReLU3d` — 3D Convolution + ReLU

``torch.nn.qat``
~~~~~~~~~~~~~~~~

Layers for the quantization-aware training

* :class:`~torch.nn.qat.Linear` — Linear (fully-connected) layer
* :class:`~torch.nn.qat.Conv2d` — 2D convolution

``torch.quantization``
~~~~~~~~~~~~~~~~~~~~~~

* Functions for quantization:

  * :func:`~torch.quantization.add_observer_` — Adds observer for the leaf
    modules (if quantization configuration is provided)
  * :func:`~torch.quantization.add_quant_dequant`— Wraps the leaf child module using :class:`~torch.quantization.QuantWrapper`
  * :func:`~torch.quantization.convert` — Converts float module with
    observers into its quantized counterpart. Must have quantization
    configuration
  * :func:`~torch.quantization.get_observer_dict` — Traverses the module
    children and collects all observers into a ``dict``
  * :func:`~torch.quantization.prepare` — Prepares a copy of a model for
    quantization
  * :func:`~torch.quantization.prepare_qat` — Prepares a copy of a model for
    quantization aware training
  * :func:`~torch.quantization.propagate_qconfig_` — Propagates quantization
    configurations through the module hierarchy and assign them to each leaf
    module
  * :func:`~torch.quantization.quantize` — Converts a float module to quantized version
  * :func:`~torch.quantization.quantize_dynamic` — Converts a float module to
    dynamically quantized version
  * :func:`~torch.quantization.quantize_qat` — Converts a float module to
    quantized version used in quantization aware training
  * :func:`~torch.quantization.swap_module` — Swaps the module with its
    quantized counterpart (if quantizable and if it has an observer)

* :func:`~torch.quantization.default_eval_fn` — Default evaluation function
  used by the :func:`torch.quantization.quantize`
* :func:`~torch.quantization.fuse_modules`
* :class:`~torch.quantization.FakeQuantize` — Module for simulating the
  quantization/dequantization at training time
* Default Observers. The rest of observers are available from
  ``torch.quantization.observer``:
  * :attr:`~torch.quantization.default_observer` — Same as ``MinMaxObserver.with_args(reduce_range=True)``
  * :attr:`~torch.quantization.default_weight_observer` — Same as ``MinMaxObserver.with_args(dtype=torch.qint8, qscheme=torch.per_tensor_symmetric)``
  * :class:`~torch.quantization.Observer` — Abstract base class for observers

* Quantization configurations
    * :class:`~torch.quantization.QConfig` — Quantization configuration class
    * :attr:`~torch.quantization.default_qconfig` — Same as
      ``QConfig(activation=default_observer, weight=default_weight_observer)``
      (See :class:`~torch.quantization.qconfig.QConfig`)
    * :attr:`~torch.quantization.default_qat_qconfig` — Same as
      ``QConfig(activation=default_fake_quant,
      weight=default_weight_fake_quant)`` (See
      :class:`~torch.quantization.qconfig.QConfig`)
    * :attr:`~torch.quantization.default_dynamic_qconfig` — Same as
      ``QConfigDynamic(weight=default_weight_observer)`` (See
      :class:`~torch.quantization.qconfig.QConfigDynamic`)
    * :attr:`~torch.quantization.float16_dynamic_qconfig` — Same as
      ``QConfigDynamic(weight=NoopObserver.with_args(dtype=torch.float16))``
      (See :class:`~torch.quantization.qconfig.QConfigDynamic`)

* Stubs
    * :class:`~torch.quantization.DeQuantStub` - placeholder module for
      dequantize() operation in float-valued models
    * :class:`~torch.quantization.QuantStub` - placeholder module for
      quantize() operation in float-valued models
    * :class:`~torch.quantization.QuantWrapper` — wraps the module to be
      quantized. Inserts the :class:`~torch.quantization.QuantStub` and
    * :class:`~torch.quantization.DeQuantStub`

Observers for computing the quantization parameters

* :class:`~torch.quantization.MinMaxObserver` — Derives the quantization
  parameters from the running minimum and maximum of the observed tensor inputs
  (per tensor variant)
* :class:`~torch.quantization.MovingAverageMinMaxObserver` — Derives the
  quantization parameters from the running averages of the minimums and
  maximums of the observed tensor inputs (per tensor variant)
* :class:`~torch.quantization.PerChannelMinMaxObserver` — Derives the
  quantization parameters from the running minimum and maximum of the observed
  tensor inputs (per channel variant)
* :class:`~torch.quantization.MovingAveragePerChannelMinMaxObserver` — Derives
  the quantization parameters from the running averages of the minimums and
  maximums of the observed tensor inputs (per channel variant)
* :class:`~torch.quantization.HistogramObserver` — Derives the quantization
  parameters by creating a histogram of running minimums and maximums.
* Observers that do not compute the quantization parameters:
    * :class:`~torch.quantization.RecordingObserver` — Records all incoming
      tensors. Used for debugging only.
    * :class:`~torch.quantization.NoopObserver` — Pass-through observer. Used
      for situation when there are no quantization parameters (i.e.
      quantization to ``float16``)

``torch.nn.quantized``
~~~~~~~~~~~~~~~~~~~~~~

Quantized version of standard NN layers.

* :class:`~torch.nn.quantized.Quantize` — Quantization layer, used to
  automatically replace :class:`~torch.quantization.QuantStub`
* :class:`~torch.nn.quantized.DeQuantize` — Dequantization layer, used to
  replace :class:`~torch.quantization.DeQuantStub`
* :class:`~torch.nn.quantized.FloatFunctional` — Wrapper class to make
  stateless float operations stateful so that they can be replaced with
  quantized versions
* :class:`~torch.nn.quantized.QFunctional` — Wrapper class for quantized
  versions of stateless operations like ``torch.add``
* :class:`~torch.nn.quantized.Conv2d` — 2D convolution
* :class:`~torch.nn.quantized.Conv3d` — 3D convolution
* :class:`~torch.nn.quantized.Linear` — Linear (fully-connected) layer
* :class:`~torch.nn.MaxPool2d` — 2D max pooling
* :class:`~torch.nn.quantized.ReLU` — Rectified linear unit
* :class:`~torch.nn.quantized.ReLU6` — Rectified linear unit with cut-off at
  quantized representation of 6

``torch.nn.quantized.dynamic``
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Layers used in dynamically quantized models (i.e. quantized only on weights)

* :class:`~torch.nn.quantized.dynamic.Linear` — Linear (fully-connected) layer
* :class:`~torch.nn.quantized.dynamic.LSTM` — Long-Short Term Memory RNN module

``torch.nn.quantized.functional``
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Functional versions of quantized NN layers (many of them accept explicit
quantization output parameters)

* :func:`~torch.nn.quantized.functional.adaptive_avg_pool2d` — 2D adaptive average pooling
* :func:`~torch.nn.quantized.functional.avg_pool2d` — 2D average pooling
* :func:`~torch.nn.quantized.functional.conv2d` — 2D convolution
* :func:`~torch.nn.quantized.functional.conv3d` — 3D convolution
* :func:`~torch.nn.quantized.functional.interpolate` — Down-/up- sampler
* :func:`~torch.nn.quantized.functional.linear` — Linear (fully-connected) op
* :func:`~torch.nn.quantized.functional.max_pool2d` — 2D max pooling
* :func:`~torch.nn.quantized.functional.relu` — Rectified linear unit
* :func:`~torch.nn.quantized.functional.upsample` — Upsampler. Will be
  deprecated in favor of :func:`~torch.nn.quantized.functional.interpolate`
* :func:`~torch.nn.quantized.functional.upsample_bilinear` — Bilenear
  upsampler. Will be deprecated in favor of
* :func:`~torch.nn.quantized.functional.interpolate`
* :func:`~torch.nn.quantized.functional.upsample_nearest` — Nearest neighbor
  upsampler. Will be deprecated in favor of
* :func:`~torch.nn.quantized.functional.interpolate`

Quantized dtypes and quantization schemes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

* :attr:`torch.qscheme` — Type to describe the quantization scheme of a tensor.
  Supported types:

  * :attr:`torch.per_tensor_affine` — per tensor, asymmetric
  * :attr:`torch.per_channel_affine` — per channel, asymmetric
  * :attr:`torch.per_tensor_symmetric` — per tensor, symmetric
  * :attr:`torch.per_channel_symmetric` — per tensor, symmetric

* ``torch.dtype`` — Type to describe the data. Supported types:

  * :attr:`torch.quint8` — 8-bit unsigned integer
  * :attr:`torch.qint8` — 8-bit signed integer
  * :attr:`torch.qint32` — 32-bit signed integer



Quantization Workflows
----------------------

PyTorch provides three approaches to quantize models.

.. _quantization tutorials:
   https://pytorch.org/tutorials/#quantization-experimental

1. Post Training Dynamic Quantization: This is the simplest to apply form of
   quantization where the weights are quantized ahead of time but the
   activations are dynamically quantized  during inference. This is used
   for situations where the model execution time is dominated by loading
   weights from memory rather than computing the matrix multiplications.
   This is true for for LSTM and Transformer type models with small
   batch size. Applying dynamic quantization to a whole model can be
   done with a single call to :func:`torch.quantization.quantize_dynamic()`.
   See the `quantization tutorials`_
2. Post Training Static Quantization: This is the most commonly used form of
   quantization where the weights are quantized ahead of time and the
   scale factor and bias for the activation tensors is pre-computed
   based on observing the behavior of the model during a calibration
   process. Post Training Quantization is typically when both memory bandwidth
   and compute savings are important with CNNs being a typical use case.
   The general process for doing post training quantization is:



   1. Prepare the model:

      a. Specify where the activations are quantized and dequantized explicitly
         by adding QuantStub and DeQuantStub modules.
      b. Ensure that modules are not reused.
      c. Convert any operations that require requantization into modules

   2. Fuse operations like conv + relu or conv+batchnorm + relu together to
      improve both model accuracy and performance.

   3. Specify the configuration of the quantization methods \'97 such as
      selecting symmetric or asymmetric quantization and MinMax or
      L2Norm calibration techniques.
   4. Use the :func:`torch.quantization.prepare` to insert modules
      that will observe activation tensors during calibration
   5. Calibrate the model by running inference against a calibration
      dataset
   6. Finally, convert the model itself with the
      torch.quantization.convert() method. This does several things: it
      quantizes the weights, computes and stores the scale and bias
      value to be used each activation tensor, and replaces key
      operators quantized implementations.

   See the `quantization tutorials`_


3. Quantization Aware Training: In the rare cases where post training
   quantization does not provide adequate accuracy training can be done
   with simulated quantization using the
   :class:`torch.quantization.FakeQuantize`. Computations will take place in
   FP32 but with values clamped and rounded to simulate the effects of INT8
   quantization. The sequence of steps is very similar.


   1. Steps (1) and (2) are identical.

   3. Specify the configuration of the fake quantization methods \'97 such as
      selecting symmetric or asymmetric quantization and MinMax or Moving Average
      or L2Norm calibration techniques.
   4. Use the :func:`torch.quantization.prepare_qat` to insert modules
      that will simulate quantization during training.
   5. Train or fine tune the model.
   6. Identical to step (6) for post training quantization

   See the `quantization tutorials`_


While default implementations of observers to select the scale factor and bias
based on observed tensor data are provided, developers can provide their own
quantization functions. Quantization can be applied selectively to different
parts of the model or configured differently for different parts of the model.

We also provide support for per channel quantization for **conv2d()**,
**conv3d()** and **linear()**

Quantization workflows work by adding (e.g. adding observers as
``.observer`` submodule) or replacing (e.g. converting ``nn.Conv2d`` to
``nn.quantized.Conv2d``) submodules in the model's module hierarchy. It
means that the model stays a regular ``nn.Module``-based instance throughout the
process and thus can work with the rest of PyTorch APIs.


Model Preparation for Quantization
----------------------------------

It is necessary to currently make some modifications to the model definition
prior to quantization. This is because currently quantization works on a module
by module basis. Specifically, for all quantization techniques, the user needs to:

1. Convert any operations that require output requantization (and thus have
   additional parameters) from functionals to module form.
2. Specify which parts of the model need to be quantized either by assigning
   ```.qconfig`` attributes on submodules or by specifying ``qconfig_dict``

For static quantization techniques which quantize activations, the user needs
to do the following in addition:

1. Specify where activations are quantized and de-quantized. This is done using
   :class:`~torch.quantization.QuantStub` and
   :class:`~torch.quantization.DeQuantStub` modules.
2. Use :class:`torch.nn.quantized.FloatFunctional` to wrap tensor operations
   that require special handling for quantization into modules. Examples
   are operations like ``add`` and ``cat`` which require special handling to
   determine output quantization parameters.
3. Fuse modules: combine operations/modules into a single module to obtain
   higher accuracy and performance. This is done using the
   :func:`torch.quantization.fuse_modules` API, which takes in lists of modules
   to be fused. We currently support the following fusions:
   [Conv, Relu], [Conv, BatchNorm], [Conv, BatchNorm, Relu], [Linear, Relu]


torch.quantization
---------------------------
.. automodule:: torch.quantization

This module implements the functions you call
directly to convert your model from FP32 to quantized form. For
example the :func:`~torch.quantization.prepare` is used in post training
quantization to prepares your model for the calibration step and
:func:`~torch.quantization.convert` actually converts the weights to int8 and
replaces the operations with their quantized counterparts. There are
other helper functions for things like quantizing the input to your
model and performing critical fusions like conv+relu.

Top-level quantization APIs
~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. autofunction:: quantize
.. autofunction:: quantize_dynamic
.. autofunction:: quantize_qat
.. autofunction:: prepare
.. autofunction:: prepare_qat
.. autofunction:: convert
.. autoclass:: QConfig
.. autoclass:: QConfigDynamic

.. FIXME: The following doesn't display correctly.
   .. autoattribute:: default_qconfig

Preparing model for quantization
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. autofunction:: fuse_modules
.. autoclass:: QuantStub
.. autoclass:: DeQuantStub
.. autoclass:: QuantWrapper
.. autofunction:: add_quant_dequant

Utility functions
~~~~~~~~~~~~~~~~~
.. autofunction:: add_observer_
.. autofunction:: swap_module
.. autofunction:: propagate_qconfig_
.. autofunction:: default_eval_fn

Observers
~~~~~~~~~~~~~~~
.. autoclass:: ObserverBase
    :members:
.. autoclass:: MinMaxObserver
.. autoclass:: MovingAverageMinMaxObserver
.. autoclass:: PerChannelMinMaxObserver
.. autoclass:: MovingAveragePerChannelMinMaxObserver
.. autoclass:: HistogramObserver
.. autoclass:: FakeQuantize
.. autoclass:: NoopObserver

Debugging utilities
~~~~~~~~~~~~~~~~~~~
.. autofunction:: get_observer_dict
.. autoclass:: RecordingObserver

torch.nn.intrinsic
--------------------------------

This module implements the combined (fused) modules conv + relu which can be
then quantized.

.. automodule:: torch.nn.intrinsic

ConvBn2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvBn2d
    :members:

ConvBnReLU2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvBnReLU2d
    :members:

ConvReLU2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvReLU2d
    :members:

ConvReLU3d
~~~~~~~~~~~~~~~
.. autoclass:: ConvReLU3d
    :members:

LinearReLU
~~~~~~~~~~~~~~~
.. autoclass:: LinearReLU
    :members:

torch.nn.instrinsic.qat
--------------------------------

This module implements the versions of those fused operations needed for
quantization aware training.

.. automodule:: torch.nn.intrinsic.qat

ConvBn2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvBn2d
    :members:

ConvBnReLU2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvBnReLU2d
    :members:

ConvReLU2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvReLU2d
    :members:

LinearReLU
~~~~~~~~~~~~~~~
.. autoclass:: LinearReLU
    :members:

torch.nn.intrinsic.quantized
--------------------------------------

This module implements the quantized implementations of fused operations like conv + relu.

.. automodule:: torch.nn.intrinsic.quantized

ConvReLU2d
~~~~~~~~~~~~~~~
.. autoclass:: ConvReLU2d
    :members:

ConvReLU3d
~~~~~~~~~~~~~~~
.. autoclass:: ConvReLU3d
    :members:

LinearReLU
~~~~~~~~~~~~~~~
.. autoclass:: LinearReLU
    :members:

torch.nn.qat
---------------------------

This module implements versions of the key nn modules **Conv2d()** and
**Linear()** which run in FP32 but with rounding applied to simulate the effect
of INT8 quantization.

.. automodule:: torch.nn.qat

Conv2d
~~~~~~~~~~~~~~~
.. autoclass:: Conv2d
    :members:

Linear
~~~~~~~~~~~~~~~
.. autoclass:: Linear
    :members:


torch.nn.quantized
----------------------------

This module implements the quantized versions of the nn layers such as
~`torch.nn.Conv2d` and `torch.nn.ReLU`.

Functional interface
~~~~~~~~~~~~~~~~~~~~
.. automodule:: torch.nn.quantized.functional

.. autofunction:: relu
.. autofunction:: linear
.. autofunction:: conv2d
.. autofunction:: conv3d
.. autofunction:: max_pool2d
.. autofunction:: adaptive_avg_pool2d
.. autofunction:: avg_pool2d
.. autofunction:: interpolate
.. autofunction:: upsample
.. autofunction:: upsample_bilinear
.. autofunction:: upsample_nearest


.. automodule:: torch.nn.quantized

ReLU
~~~~~~~~~~~~~~~
.. autoclass:: ReLU
    :members:

ReLU6
~~~~~~~~~~~~~~~
.. autoclass:: ReLU6
    :members:

Conv2d
~~~~~~~~~~~~~~~
.. autoclass:: Conv2d
    :members:

Conv3d
~~~~~~~~~~~~~~~
.. autoclass:: Conv3d
    :members:

FloatFunctional
~~~~~~~~~~~~~~~
.. autoclass:: FloatFunctional
    :members:

QFunctional
~~~~~~~~~~~~~~~
.. autoclass:: QFunctional
    :members:

Quantize
~~~~~~~~~~~~~~~
.. autoclass:: Quantize
    :members:

DeQuantize
~~~~~~~~~~~~~~~
.. autoclass:: DeQuantize
    :members:

Linear
~~~~~~~~~~~~~~~
.. autoclass:: Linear
    :members:

torch.nn.quantized.dynamic
----------------------------

.. automodule:: torch.nn.quantized.dynamic

Linear
~~~~~~~~~~~~~~~
.. autoclass:: Linear
    :members:

LSTM
~~~~~~~~~~~~~~~
.. autoclass:: LSTM
    :members: