Since we now will support `capturable=False` when it's valid, narrow the eager fallback conditions to the cases where `compile` will fail. The lone case here is when the user deletes the capturable flag; `state_steps` are on cuda and `capturable` is `False`. Because a cuda tensor is not supported in the `value` kwarg for foreach ops this results in an error.
The fallback wrapper is changed to check the device of `state_steps` if `capturable=False`.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/125825
Approved by: https://github.com/janeyx99
This resolves a bug in eager where if an old state dict is loaded (without the capturable flag) but the original dict had the capturable flag, then state_steps would be on cuda but we would take the non-capturable path. We now fallback to eager if capturable=False.
Current design doc and discussion: https://docs.google.com/document/d/1DmmbiaSp16CDZtGw1qzXKHFTY_0gqc0xpnBdviXq0vk/edit#heading=h.871u7bvwz7ze
Note on the actual fallback logic - there was an issue with torchscript originally not handling *args, **kwargs properly, after rectifying that by using `functools.wraps`, there was an additional bug with scoping which required the single tensor implementation to be in the global scope at the time of the fallback closure being created. I pass in the single tensor function to the `_disable_dynamo_if_unsupported` decorator to workaround this bug.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/123619
Approved by: https://github.com/janeyx99
Should allow for uses cases mentioned in #110940
This would allow scalars to also be float64s in the foreach implementation. The fused implementation would still create a float32 step on Adam and AdamW. This PR also does NOT worry about performance and is mainly for enablement.
Next steps:
- Relax the constraint on fused adam(w) and allow torch.float64 scalars there
- Allow _performant_ mixed dtypes in foreach (a bigger project in itself).
This PR will conflict with my other PRs, I will figure out a landing order
Pull Request resolved: https://github.com/pytorch/pytorch/pull/115841
Approved by: https://github.com/albanD
Removes a part of the sparse adam test and the following three tests: `test_fused_optimizer_raises`, `test_duplicate_params_across_param_groups`, `test_duplicate_params_in_one_param_group`
```
(pytorch-3.10) [janeyx@devgpu023.odn1 ~/local/pytorch (d2d129de)]$ python test/test_optim.py -k test_fused_optimizer_raises -k test_duplicate_params_across_param_groups -k test_duplicate_params_in_one_param_group
/home/janeyx/.conda/envs/pytorch-3.10/lib/python3.10/site-packages/scipy/__init__.py:146: UserWarning: A NumPy version >=1.17.3 and <1.25.0 is required for this version of SciPy (detected version 1.26.0
warnings.warn(f"A NumPy version >={np_minversion} and <{np_maxversion}"
...
----------------------------------------------------------------------
Ran 3 tests in 0.023s
OK
```
Increases coverage by testing the duplicate param tests on ALL the optims instead of just one each. Also fixes SparseAdam bug which was accidentally calling torch.unbind through list instead of putting params in a list. This bug was caught by migrating the weird warning stuff to just one easy warning context manager, which checks that nothing else gets raised.
The new test_errors does not run slower than before, overhead is still king:
```
(pytorch-3.10) [janeyx@devgpu023.odn1 ~/local/pytorch (d2d129de)]$ python test/test_optim.py -k test_errors
/home/janeyx/.conda/envs/pytorch-3.10/lib/python3.10/site-packages/scipy/__init__.py:146: UserWarning: A NumPy version >=1.17.3 and <1.25.0 is required for this version of SciPy (detected version 1.26.0
warnings.warn(f"A NumPy version >={np_minversion} and <{np_maxversion}"
..........................
----------------------------------------------------------------------
Ran 26 tests in 10.337s
OK
```
Compared to test_errors BEFORE my commit :p
```
(pytorch-3.10) [janeyx@devgpu023.odn1 ~/local/pytorch (b47aa696)]$ python test/test_optim.py -k test_errors
/home/janeyx/.conda/envs/pytorch-3.10/lib/python3.10/site-packages/scipy/__init__.py:146: UserWarning: A NumPy version >=1.17.3 and <1.25.0 is required for this version of SciPy (detected version 1.26.0
warnings.warn(f"A NumPy version >={np_minversion} and <{np_maxversion}"
.............sssssssssssss
----------------------------------------------------------------------
Ran 26 tests in 11.980s
OK (skipped=13)
(pytorch-3.10) [janeyx@devgpu023.odn1 ~/local/pytorch (b47aa696)]$
```
Pull Request resolved: https://github.com/pytorch/pytorch/pull/116315
Approved by: https://github.com/mikaylagawarecki
Context:
https://github.com/pytorch/pytorch/pull/47724 fixed the problem that SparseAdam could not handle generators by using the `list(...)` construct. However, this meant that SparseAdam deviated from other optimizers in that it could _accept_ a raw Tensors/Parameter vs requiring a container of them. This is not really a big deal.
So why this PR?
I do think this PR is cleaner. It uses the fact that the Optimizer parent class already containerizes parameters into parameter groups, so we could reuse that here by calling `super().__init__` first and then filter the param_groups after. This change would also make SparseAdam consistent with the rest of our optimizers in that only containerized params are accepted, which technically is BC breaking SO I've added a deprecation warning that we should remove in May 2024.
(But is it really BC breaking when we've said in the docs that params should be an iterable this whole time? Maybe this is just a bug fix....😛)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/114425
Approved by: https://github.com/drisspg
While reading the documentation of the optimizers I noticed the description of the `maximize` option is misleading. It currently reads as if the parameters would we maximized, which is factually incorrect. This PR proposes a more clear description.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/112724
Approved by: https://github.com/albanD
Moves the logic to casting state to match parameters into a hook so that users can choose to enable their hooks before or after the casting has happened.
With this, there is a little bit of redundancy of the id_map building and the check that the param groups are still aligned in length.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/106725
Approved by: https://github.com/albanD
The thing we do still deep copy is the param_groups, which is much lighter weight. This should also save memory when loading from a checkpoint.
The deepcopy was introduced in ecfcf39f30, but module.py had only a shallow copy at that point so it did not actually bring parity.
Incorporates an XLA fix, which is why I'm updating the pin to ca5eab87a7
Pull Request resolved: https://github.com/pytorch/pytorch/pull/106082
Approved by: https://github.com/albanD, https://github.com/Skylion007
This PR re-lands
- [Typing] Fix PEP 484 Violation (#105022)
- Update mypy to 1.4.1 (#91983)
That were reverted due to the conflict with internal source repo.
Mostly fixes for PEP-484 violation (i.e. when default arg is set to None, but type is not annotated as optional)
Plus few real fixes:
- Add missing `_get_upgraders_entry_map` to `torch/_C/__init__.pyi`
- Add missing return statement to `torch._export. deserialize_graph`
- Fix error message in `torch.ao.ns.fx.weight_utils.get_lstm_mod_weights`
- Add assert it `torch/optim/optimizer.py` that Optional list is not None
TODO (in followup PR):
- Fix erroneous `isinstance` check in `torch/ao/quantization/_pt2e/qat_utils.py`
Unrelated, to bypass CI failures due to the gcc9 dependency update in Ubuntu-18.04:
- Add hack to squash older libstdc++ from conda environment in favor one from OS to `.ci/docker/install_conda.sh`
- Update bazel cuda builds to focal, as with libstdc++-6.0.32 bazel builds loose the ability to catch exceptions (probably because they link with cupti statically, but I could not found where it is done)
Pull Request resolved: https://github.com/pytorch/pytorch/pull/105227
Approved by: https://github.com/atalman, https://github.com/albanD, https://github.com/Skylion007
This PR re-lands
- [Typing] Fix PEP 484 Violation (#105022)
- Update mypy to 1.4.1 (#91983)
That were reverted due to the conflict with internal source repo.
Mostly fixes for PEP-484 violation (i.e. when default arg is set to None, but type is not annotated as optional)
Plus few real fixes:
- Add missing `_get_upgraders_entry_map` to `torch/_C/__init__.pyi`
- Add missing return statement to `torch._export. deserialize_graph`
- Fix error message in `torch.ao.ns.fx.weight_utils.get_lstm_mod_weights`
- Add assert it `torch/optim/optimizer.py` that Optional list is not None
TODO (in followup PR):
- Fix erroneous `isinstance` check in `torch/ao/quantization/_pt2e/qat_utils.py`
Pull Request resolved: https://github.com/pytorch/pytorch/pull/105227
Approved by: https://github.com/atalman, https://github.com/albanD, https://github.com/Skylion007
Starts addressing https://github.com/pytorch/pytorch/issues/97712 by
- Minimizing intermediates usage for foreach Adam
- Document the extra memory usage
- Add comments within the code for clarity now that we reuse intermediates
- Add tests
- Did some refactoring
Next steps involve doing this for all other foreach implementations. Note that even after this change, foreach mem usage will be higher than forloop due to the fact that we have a minimum budget of 1 intermediate (to not muddle the input values) and the intermediate will be larger. For capturable, the memory usage is higher due to moving more tensors to CUDA.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/104780
Approved by: https://github.com/albanD
This is a reland of https://github.com/pytorch/pytorch/pull/100007 with a build fix for Windows debug builds.
`at::native::ParamsHash` only works on structs with standard layout, but `std::string` isn't one in Visual C++ debug builds, which one can easily verified by running something like:
```cpp
#define _DEBUG
#include <type_traits>
#include <string>
static_assert(std::is_standard_layout_v<std::string>, "Oh noes");
```
If above conditon is not met, instead of printing a static_assert output, VC++ raises a very cryptic compilation errors, see https://github.com/pytorch/pytorch/pull/100007#discussion_r1227116292 for more detail.
Also, using `std::hash` for string should result in a faster hash function.
(cherry picked from commit 74b7a6c75e698378882d30958908073407f97fb3)
<!--
copilot:summary
-->
### <samp>🤖 Generated by Copilot at 5914771</samp>
This pull request introduces a new function `_group_tensors_by_device_and_dtype` that can group tensors by their device and dtype, and updates the `foreach` utilities and several optimizers to use this function. The goal is to improve the performance, readability, and compatibility of the code that handles tensors with different properties. The pull request also adds a test case and type annotations for the new function, and some error checks for the `fused` argument in Adam and AdamW.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/103912
Approved by: https://github.com/janeyx99
This reverts commit b9da79d2800c2ca00b57bc3ac86b43e01be174b6.
Reverted https://github.com/pytorch/pytorch/pull/98706 on behalf of https://github.com/huydhn due to Sorry for reverting your PR but a bunch of inductor tests are failing after this commit, so reverting the PR just to be sure
