- During op dispatch local tensor is supposed to collect rng state from CPU and CUDA
devices so that it can be reset before execution of the op for each such that ops
with randomness produces the same result for all ranks (note that we are planning a
separate change to add support of per rank rng state). Previously we relied on
op input arguments to deduce which devices to get rng state from. Which doesn't work
for factory functions such torch.randn. Hence this changes switches to uncondionally
collecting rng state from all devices.
- Fixing per rank specific computations in _MaskedPartial and Shard placements discovered
during test enablement.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/165716
Approved by: https://github.com/ezyang
- During op dispatch local tensor is supposed to collect rng state from CPU and CUDA
devices so that it can be reset before execution of the op for each such that ops
with randomness produces the same result for all ranks (note that we are planning a
separate change to add support of per rank rng state). Previously we relied on
op input arguments to deduce which devices to get rng state from. Which doesn't work
for factory functions such torch.randn. Hence this changes switches to uncondionally
collecting rng state from all devices.
- Fixing per rank specific computations in _MaskedPartial and Shard placements discovered
during test enablement.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/165716
Approved by: https://github.com/ezyang
It generally recommended to use `is/is not` to compare types. Therefore this series of changes apply this suggestion in the code base, and it aims to finally enabling related linter checks.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/165037
Approved by: https://github.com/mlazos
Increase the tolerance for the following UTs as there was a slight mismatch seen on MI200.
- test_data_parallel.py:test_strided_grad_layout
- test_c10d_nccl.py:test_grad_layout_1devicemodule_1replicaperprocess
Skip for MI200:
- test_fully_shard_training.py:test_2d_mlp_with_nd_mesh
- test_2d_composability.py:test_train_parity_2d_mlp
- test_fully_shard_overlap.py:test_fully_shard_training_overlap
Fixes#159489Fixes#159488Fixes#152700Fixes#125555Fixes#134139
Working as is on both MI200 and MI300:
Fixes#125991Fixes#125918
Pull Request resolved: https://github.com/pytorch/pytorch/pull/164390
Approved by: https://github.com/jeffdaily
It seems `TEST_CUDA` is set to true even for ROCm (MI200) jobs. Changing if TEST_CUDA to an else condition to avoid running symmetric memory UTs on MI200. For other non-rocm arch, it should return true and can be skipped using other skip decorators.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/163205
Approved by: https://github.com/ezyang
Co-authored-by: Jeff Daily <jeff.daily@amd.com>
For https://github.com/pytorch/pytorch/issues/114850, we will port distributed tests to Intel GPU. This PR will work on some test files under test/distributed. We could enable Intel GPU with following methods and try the best to keep the original code styles:
- instantiate_device_type_tests()
- use "torch.accelerator.current_accelerator()" to determine the accelerator backend
- use requires_accelerator_dist_backend to allow both nccl and xccl test
- enabled XPU for some test path
- Change the hardcoded world_size according to device_count.
- Unify some common code under torch/testing/_internal for multiple backend, for example:
Added xpu for Backend.backend_capability and dist.Backend.register_backend()
Pull Request resolved: https://github.com/pytorch/pytorch/pull/159473
Approved by: https://github.com/guangyey, https://github.com/d4l3k
After the UT suite moved to `MultiProcContinuousTest`, `skipIfRocm` decorator started failing rather than skipping UTs because now we spawn multiple threads before the skip decorator is taken into account and the skip decorator was raising an exception to exit the process. But, the parent process treated the child process exiting as a crash rather than a skip. Additionally, in `MultiProcContinuousTest`, if one UT fails all subsequent ones are also skipped which makes sense since there's one setup for the entire suite. However, this showed up as many failing/skipped UTs in the parity.
I added multiprocess version of skip decorators for ROCm, including, `skip_if_rocm_arch_multiprocess` and
`skip_if_rocm_ver_lessthan_multiprocess`. These are needed as symmetric memory feature is only supported on MI300 onwards and we need to skip them for other archs and some UTs only work after ROCm7.0.
Fixes#161249Fixes#161187Fixes#161078Fixes#160989Fixes#160881Fixes#160768Fixes#160716Fixes#160665Fixes#160621Fixes#160549Fixes#160506Fixes#160445Fixes#160347Fixes#160203Fixes#160177Fixes#160049Fixes#159921Fixes#159764Fixes#159643Fixes#159499Fixes#159397Fixes#159396Fixes#159347Fixes#159067Fixes#159066Fixes#158916Fixes#158760Fixes#158759Fixes#158422Fixes#158138Fixes#158136Fixes#158135
Fixes #ISSUE_NUMBER
Pull Request resolved: https://github.com/pytorch/pytorch/pull/162811
Approved by: https://github.com/jeffdaily
For https://github.com/pytorch/pytorch/issues/114850, we will port distributed tests to Intel GPU. This PR will work on some test files under test/distributed. We could enable Intel GPU with following methods and try the best to keep the original code styles:
- instantiate_device_type_tests()
- use "torch.accelerator.current_accelerator()" to determine the accelerator backend
- use requires_accelerator_dist_backend to allow both nccl and xccl test
- enabled XPU for some test path
- Change the hardcoded world_size according to device_count.
- Unify some common code under torch/testing/_internal for multiple backend, for example:
Added xpu for Backend.backend_capability and dist.Backend.register_backend()
Pull Request resolved: https://github.com/pytorch/pytorch/pull/159473
Approved by: https://github.com/guangyey, https://github.com/d4l3k
Avoid failures caused by tests exiting via sys.exit instead of `unittest.skip`
In particular it will not try to start the test (causing forks into subprocess) just to stop them (killing the subprocess) which is done in the test setup
Using `unittest.skip` decorators avoids the starting of the test in the first place.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/158846
Approved by: https://github.com/Skylion007
For https://github.com/pytorch/pytorch/issues/114850, we will port distributed tests to Intel GPU. This PR will work on some test files under test/distributed. We could enable Intel GPU with following methods and try the best to keep the original code styles:
- instantiate_device_type_tests()
- use "torch.accelerator.current_accelerator()" to determine the accelerator backend
- use requires_accelerator_dist_backend to allow both nccl and xccl test
- enabled XPU for some test path
- Change the hardcoded world_size according to device_count.
- Unify some common code under torch/testing/_internal for multiple backend, for example:
Added xpu for Backend.backend_capability and dist.Backend.register_backend()
Pull Request resolved: https://github.com/pytorch/pytorch/pull/159473
Approved by: https://github.com/guangyey, https://github.com/d4l3k
For https://github.com/pytorch/pytorch/issues/114850, we will port distributed tests to Intel GPU.
We could enable Intel GPU with following methods and try the best to keep the original code styles:
- instantiate_device_type_tests()
- use "torch.accelerator.current_accelerator()" to determine the accelerator backend
- enabled XPU for some test path
- Unify some common code under torch/testing/_internal for multiple backend, for example:
- requires_nccl_version
- _dynamo_dist_per_rank_init
- DynamoDistributedSingleProcTestCase
- DistTestCases
- FSDPTestMultiThread
Pull Request resolved: https://github.com/pytorch/pytorch/pull/158533
Approved by: https://github.com/guangyey, https://github.com/d4l3k
Co-authored-by: Yu, Guangye <106960996+guangyey@users.noreply.github.com>
Automatically replaces split with rsplit when relevant and only performs the split up to the first ( or last value). This allows early return of the split function and improve efficiency.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/160107
Approved by: https://github.com/albanD
Avoid failures caused by tests exiting via sys.exit instead of `unittest.skip`
In particular it will not try to start the test (causing forks into subprocess) just to stop them (killing the subprocess) which is done in the test setup
Using `unittest.skip` decorators avoids the starting of the test in the first place.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/158846
Approved by: https://github.com/Skylion007
### MOTIVATION
To generalize Distributed test cases for non-CUDA devices
### CHANGES
- test/distributed/optim/test_zero_redundancy_optimizer.py
- test/distributed/test_c10d_logger.py
- test/distributed/test_compute_comm_reordering.py
Replaced hard coded device names with get_devtype from torch.testing._internal.common_fsdp.
DistributedTestBase is used instead of MultiProcessTestCase, to make use of helper functions.
- torch/testing/_internal/common_distributed.py
extended common utility functions
Pull Request resolved: https://github.com/pytorch/pytorch/pull/152471
Approved by: https://github.com/d4l3k
`SIGABRT` is a common return by *negative* distributed tests, which checks for effectiveness of NaN assert, watchdog throw, etc.
These errors are not detectable by traditional statements like `with self.assertRaises(RuntimeError)`.
Instead, we'd need to check for the process's return code, e.g. `SIGABRT(6)` would have a return code of -6.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153167
Approved by: https://github.com/fduwjj
1. Reworked `MultiProcContinousTest` to spawn processes during `setUpClass` instead of `main` (so that we can support multiple TestClass'es in one file).
2. The child processes are now an infinite loop, monitoring test IDs passed from main process via a task queue. Reciprocally, the child processes inform the main process completion of a test via a completion queue.
3. Added a test template.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153653
Approved by: https://github.com/d4l3k, https://github.com/fegin, https://github.com/fduwjj
`SIGABRT` is a common return by *negative* distributed tests, which checks for effectiveness of NaN assert, watchdog throw, etc.
These errors are not detectable by traditional statements like `with self.assertRaises(RuntimeError)`.
Instead, we'd need to check for the process's return code, e.g. `SIGABRT(6)` would have a return code of -6.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153167
Approved by: https://github.com/fduwjj
`SIGABRT` is a common return by *negative* distributed tests, which checks for effectiveness of NaN assert, watchdog throw, etc.
These errors are not detectable by traditional statements like `with self.assertRaises(RuntimeError)`.
Instead, we'd need to check for the process's return code, e.g. `SIGABRT(6)` would have a return code of -6.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153167
Approved by: https://github.com/fduwjj
1. Reworked `MultiProcContinousTest` to spawn processes during `setUpClass` instead of `main` (so that we can support multiple TestClass'es in one file).
2. The child processes are now an infinite loop, monitoring test IDs passed from main process via a task queue. Reciprocally, the child processes inform the main process completion of a test via a completion queue.
3. Added a test template.
Pull Request resolved: https://github.com/pytorch/pytorch/pull/153653
Approved by: https://github.com/d4l3k, https://github.com/fegin, https://github.com/fduwjj
